Translucent Silicone

25A Part 2 Liquid Platinum Silicone

CREKEM is a professional manufacturer and supplier of 25A Liquid Platinum Silicone Rubber, providing high-performance two component platinum cured silicone rubber for various mold making applications.

Our 25A platinum silicone rubber features excellent flexibility, tear resistance, low shrinkage, and outstanding reproduction of fine details, making it an ideal choice for creating durable silicone molds for resin casting, crafts, prototypes, sculptures, and industrial applications.

The two-part liquid silicone system consists of Part A and Part B, which are mixed at a simple 1:1 weight ratio and cured at room temperature to form an elastic silicone rubber mold.

Specification of 25A part 2 Liquid Platinum Silicone

25A liquid silicone rubber is one of the most popular hardness levels for mold making because it provides a good balance between softness and strength.

With a Shore A 25 hardness, this silicone material offers:

  • Excellent flexibility for easy demolding
  • High tear strength for repeated mold use
  • Accurate detail reproduction
  • Low shrinkage after curing
  • Good release properties without sticking
  • Long service life for silicone molds

It is suitable for making flexible molds where both detail accuracy and durability are required.

Applications of 25A Liquid Platinum Silicone Rubber

Our RTV-2 platinum silicone rubber can be used for manufacturing silicone molds in various industries, including:

  • Epoxy resin molds
  • Resin casting molds
  • Candle molds
  • Soap molds
  • Concrete and stone molds
  • Plaster molds
  • Sculpture and art molds
  • Prototype molds
  • Jewelry casting molds
  • Decorative product molds
  • Handmade craft molds

The excellent flowability of liquid silicone allows it to capture small surface details, textures, and complex shapes from original patterns.

How to Use Two Part Liquid Silicone Rubber

For best molding results, please follow the recommended process:

1. Mixing

Mix Part A and Part B at a 1:1 ratio by weight.

Stir slowly and thoroughly until the material becomes completely uniform. Avoid introducing excessive air bubbles during mixing.

2. Vacuum Degassing

For high-detail silicone molds, vacuum degassing is recommended to remove trapped air bubbles and improve surface quality.

3. Pouring

Pour the mixed silicone rubber slowly over the original model from a thin stream to minimize air entrapment.

4. Curing

Allow the silicone mold to fully cure before demolding. Normally, the mold can be used after

Database of 25A part 2 Liquid Platinum Silicone

Properties1:1 Platinum SiliconeFast Cur Platinum Silicone
Type25A 2 part Liquid Platinum Silicone25A Liquid Platinum based Silicone
Hardness ( shore A )25 A25 A
Tensile Strength4 MPA4 MPA
Shrinkage0.3~0.5%0.1%
Melting Point (°C)-50 °C to 230 °C-50 °C to 230 °C
Elongation

560%

560%
Usage

Low Viscosity for Pourable 

High viscosity for Brushable

Spray Silicone Rubber

Low Viscosity for Pourable 

High viscosity for Brushable

Spray Silicone Rubber

Custom Liquid Platinum Silicone Rubber Manufacturer

 

We provide customized RTV-2 liquid silicone rubber solutions according to customers’ requirements, including hardness adjustment, pot life & curing time adjustment, color customization, packaging options, and application support.

If you are looking for reliable 25A platinum silicone rubber for mold making, please contact CREKEM for technical advice and product information.

25A part 2 Liquid Platinum Silicone

Related Products

Favorite Tags

Contact us

Elevate your business to the next leverl by partnering with a leading Chinese 25A part 2 Liquid Platinum Silicone

Get Your Grade Recommendation