TIN CURE SILICONE RUBBER
Choose the Right Tin Cure Silicone for Every Mold
Condensation-cure silicone rubber for detailed molds, reliable demolding and cost-effective production. Choose a Crekem performance series by mold complexity, production scale and required flexibility.
10+ Years
Silicone Experience
Clear Selection for Applications
Custom Options
Hardness & Color
Technical Support
Before & After Purchase
Crekem Performance Series
Start with mold complexity, production scale and the flexibility you need. Each Crekem series follows a distinct performance profile.
FOR COMPLEX & DETAILED MOLDS
Flex Detail Series
Soft, flexible silicone for detailed or undercut molds where easy release matters most.
- Best for: complex shapes and delicate details
- Typical hardness: Shore A 10–20
- Key benefit: high flexibility and tear resistance
FOR GENERAL-PURPOSE MOLD MAKING
Versatile Mold Series
A balanced option for everyday mold making, combining flow, strength and dimensional stability.
- Best for: crafts, resin, gypsum and concrete
- Typical hardness: Shore A 20–30
- Key benefit: versatile performance and value
FOR LARGE & STRUCTURAL MOLDS
Structural Mold Series
Controlled-flow, higher-strength silicone for larger molds and demanding production conditions.
- Best for: statues, architectural pieces and large casts
- Typical hardness: Shore A 30–40
- Key benefit: stability, strength and extended working time
Find the Right Series for Your Application
| Series | Color | Hardness | Mix Ratio | Working Time | Best For |
|---|---|---|---|---|---|
| Flex Detail | White & Color | Shore A 5-10 | 100:3 | 30–45 min | Undercuts & fine detail |
| Versatile Mold | White & Color | Shore A 15-20 | 100:3 | 30–45 min | Resin, gypsum & crafts |
| Versatile Mold | White & Color | Shore A 25-30 | 100:3 | 30–45 min | Concrete & production molds |
| Structural Mold | White & Color | Shore A 35-40 | 100:3 | 30–45 min | Large and supported molds |
Technical properties may vary by grade, catalyst ratio and operating conditions. Please refer to the relevant TDS or contact Crekem for product selection.
Common Applications
Each application card is an independent Elementor column with its own image, heading and description.
Resin & Craft Casting
Flexible molds for decorative resin, candles, soap and handmade products.
Concrete & Stone
Durable reusable molds for architectural elements, artificial stone and concrete décor.
Sculpture & Replication
Accurate reproduction of sculpture, ornaments, prototypes and detailed masters.
Need Platinum Cure Silicone Instead?
Keep the two platinum families separate from Tin Cure so visitors can choose by appearance and application requirements.
Translucent Platinum Silicone
For precision molds where dimensional stability, low shrinkage and easy pigmenting are priorities.
Transparent / Clear Platinum Silicone
For optical, encapsulation and display applications that require high clarity and premium performance.
Tin Cure Silicone FAQs
Choose Flex Detail for deep undercuts and delicate textures, Versatile Mold for routine multi-purpose casting, and Structural Mold for larger parts requiring greater stability.
The correct ratio depends on the selected grade and required cure speed. Always follow the current Crekem TDS and test a small batch before production.
Customization may be available depending on order quantity and application. Send your target hardness, color, working time and casting material with your inquiry.
Tin Cure is cost-effective and versatile for general mold making. Platinum Cure is preferred where very low shrinkage, high stability, cleanliness or transparency is required.
Tell Us About Your Mold Project
Share the master material, mold dimensions, casting material, target hardness and expected order quantity. We will recommend a suitable grade and provide its TDS.
